The Federal Aviation Administration's decision to cut funding for the control tower at Idaho Falls Regional Airport doesn't mean the airport will be closing.
Airport Director Craig Davis said he has received word from United Express, Delta and Allegiant Air that they will continue to provide the same number of flights. In fact, more than a dozen commercial flight take off or land at IFRA each week durin hours when the tower is closed.
Idaho Falls and Pocatello were on a list released Friday of more than 100 airports where towers would be closed because of across-the-board federal spending cuts that went into effect Marxh 1.
Local pilot Mike Hart offered this take on what the effect is likely to be: "Imagine what traffic on 17th Street would be like if instead of traffic lights and turn arrows at each intersection you had four-way stops. Traffic would continue, it would just be slowed down and more frustrating."
Davis said the top consideration of the city and the airport management will continue to be safety.
Saturday, March 23, 2013
Friday, March 22, 2013
Smith Group plans to move Chevy, Honda dealerships to Sunnyside Road
Excavation work on the land where the Smith Group plans to relocate its Chevrolet and Honda dealerships. |
Smith has asked the Bonneville County Commission to change the zoning on 19 acres changed from agricultural to commercial. But crews are already digging trenches for the Porter Canal, which flows south from Snake River Landing and needs to be piped under the land before any surface work can start.
Smith said he is racing against the clock. What he is able to do this year depends on whether he can get the canal covered before the water starts flowing. If that happens, they will be able to start grading the land and paving the lots. Smith said he figures he has until around April 15.
Thursday, March 21, 2013
Tacoma Screw Products plans 10,000-square-foot store for Idaho Falls
Earlier this month we reported that Tacoma Screw Products, a 66-year-old company with 16 stores in the Pacific Northwest, had bought the old Plaza Lanes property at 1811 North Yellowstone Avenue.
John Wolfe, the company's former CEO and current "executive adviser," said the company plans to start building its new store in early May and that they hope to be open in the fall. It will be about 10,000 square feet and much like the company's stores in Boise and Twin Falls.
The biggest challenge was finding a buyer for the lanes inside the old Plaza Lanes building, which has to be torn down before any new construction can begin. The wood is being cut up and shipped to a business in the southeastern United States that fabricates old lanes into table and bar tops.
"I've learned a lot about bowling lanes on this job," Wolfe said. One thing he didn't know was that maple is used for the parts of the lane where people let go of the ball and where the pins are set up. That's because it has to stand up to more punishment. In the middle section where the balls simply rolls, the lane is made of softer wood, like pine or fir.
Wolfe said he knew very little about Idaho Falls before checking the market out as a possible store location, but that he has been "impressed a lot by the upscale nature of development in the area."
Tacoma Screw Products has a very diversified customer base that includes retail, manufacturing, construction, transportation, aerospace, maritime, agricultural, food processing, recreational, institutional operations, and city, county, state, and federal governmental agencies. When customers need custom or special fasteners that are oversized, require special threading or bending, the company has a machine shop to fabricate them.
The company typically employs three or four people to work in a store and three or four people to handle outside sales.
Here's a link to a story about the company that ran last fall in the Tacoma News Tribune: http://www.thenewstribune.com/2012/10/28/2347441/tacoma-screw-broadens-its-sales.html.
And here's the link to their Facebook page: https://www.facebook.com/tacomascrew
John Wolfe, the company's former CEO and current "executive adviser," said the company plans to start building its new store in early May and that they hope to be open in the fall. It will be about 10,000 square feet and much like the company's stores in Boise and Twin Falls.
The biggest challenge was finding a buyer for the lanes inside the old Plaza Lanes building, which has to be torn down before any new construction can begin. The wood is being cut up and shipped to a business in the southeastern United States that fabricates old lanes into table and bar tops.
"I've learned a lot about bowling lanes on this job," Wolfe said. One thing he didn't know was that maple is used for the parts of the lane where people let go of the ball and where the pins are set up. That's because it has to stand up to more punishment. In the middle section where the balls simply rolls, the lane is made of softer wood, like pine or fir.
Wolfe said he knew very little about Idaho Falls before checking the market out as a possible store location, but that he has been "impressed a lot by the upscale nature of development in the area."
Tacoma Screw Products has a very diversified customer base that includes retail, manufacturing, construction, transportation, aerospace, maritime, agricultural, food processing, recreational, institutional operations, and city, county, state, and federal governmental agencies. When customers need custom or special fasteners that are oversized, require special threading or bending, the company has a machine shop to fabricate them.
The company typically employs three or four people to work in a store and three or four people to handle outside sales.
Here's a link to a story about the company that ran last fall in the Tacoma News Tribune: http://www.thenewstribune.com/2012/10/28/2347441/tacoma-screw-broadens-its-sales.html.
And here's the link to their Facebook page: https://www.facebook.com/tacomascrew
Wednesday, March 20, 2013
The Hawk 105.5 FM names new program director
Don Jarrett |
Jarrett has spent the past 15 years of his radio career programming and hosting at stations in Idaho, Oregon and Utah, including KEGA-FM 101.5 The Eagle in Salt Lake City, and KAWO-FM WOW 104.3 in Boise. Most recently he was midday host on KUPI 99 and morning host on KQEO-FM 107.1 FM The Arrow.
He is the recipient of five Idaho State Broadcasters Association Radio Program of the Year awards and three Utah Metro Radio Personality of the Year awards.
To listen in, follow this link: http://tunein.com/radio/The-Hawk-1055-s34683/
Riverbend Communications companies include, Classy 97, Z103 105.5 The Hawk, KBEAR 101, NewsTalk 97.7/690/1260, Riverbend Digital, Riverbend Outdoor and Riverbend Productions. The company is owned and operated by Frank and Belinda VanderSloot.
Tuesday, March 19, 2013
Idaho Falls spokesman resigns to take job as Lost Rivers Hospital CEO
Brad Huerta |
Huerta came to work for Idaho Falls in May 2012. Prior to that, he was director of strategic planning and public information for Portneuf Medical Center, then the principal of his own company, Insight Communication Strategies. He also teaches health care administration for the Idaho State University adjunct faculty.
Subscribe to:
Posts (Atom)